Table of Contents
Advertisement
Object
• Regulatory Domain
• Network SSID
• Site Survey
• Enable Wireless
• Disable SSID Broadcasting
Enable Isolated
Radio Mode
• Channel
• Data Rate
• Security Setting
• Transmit Power
• Transmit Distance
• TDMA
Figure 5-3 Basic Settings - AP
Description
Select your domain from the list.
It is the wireless network name. The default SSID is
WMC252-300.
Click "Site Survey" to check the signal of remote sites.
Check it to enable Wireless function.
Check it to disable SSID broadcasting.
Check it to isolate each connected wireless client so that they
cannot access each other.
Select the channel width to "Auto Select", "5G 11NA HT20" or
"5G 11NA HT40"
Select the operating channel you would like to use. The channel
range will be changed by selecting a different domain.
Select MCS0~15 or Auto from the pull-down menu. The default is
"Auto".
Press "Setup" for more configurations. Please refer to 5.1.7
Security Setting for more information.
The range of transmit power is "12~27 dbm". In case of
shortening the distance and the coverage of the wireless
network, input a smaller value to reduce the radio transmission
power.
Select a specified distance of the two nodes.
Displays the System Time.
-34-
Advertisement
Table of Contents
