Table of Contents
Advertisement
Object
• Filtering
• Protocol
• IP Address
• Comment
5.1.17 Port Filtering Settings
Click "Operation Mode" "AP Router" or "Wireless ISP" and then enter the "Port Filtering Settings" by
clicking the Setup button next to it. This section allows you to configure the port filtering settings.
Object
• Filtering
• Protocol
• Port Range
• Comment
Figure 5-28 IP Filtering Settings
Description
Enable or disable IP Filtering.
You can choose TCP, UDP or Both.
Enter the IP address to be filtered.
Set a name for the rule.
Figure 5-29 Port Filtering Settings
Description
Enable or disable IP Filtering.
You can choose TCP, UDP or Both.
Enter the range of Port to be filtered.
Set a name for the rule.
-57-
Advertisement
Table of Contents
