Table of Contents
Advertisement
5.1.10 WAN Port Settings
Click "Operation Mode" "AP Router" or "Wireless ISP" and then enter the "WAN Port Settings" by clicking
the Setup button next to it. This section allows you to configure the internet connection settings.
DHCP (Auto Config)
Choose "DHCP" and the router will automatically obtain IP addresses, subnet masks and gateway addresses
from your ISP.
Static Mode (Fixed IP)
If your ISP offers you static IP Internet connection type, select "Static Mode" and then enter IP address, subnet
mask, primary DNS and secondary DNS information provided by your ISP in the corresponding fields.
Object
• IP Address
Assigned by
Your ISP
• IP Subnet Mask
• ISP Gateway IP
Address
Figure 5-20 WAN Port Settings – DHCP
Figure 5-21 WAN Port Settings – Static IP
Description
Enter the WAN IP address provided by your ISP. Enquire your ISP if you
are not clear.
Enter WAN Subnet Mask provided by your ISP.
Enter the WAN Gateway address provided by your ISP.
-49-
Advertisement
Table of Contents
