Security Setting; Figure 5-9 Security Settings - Interlogix WMC252-1W-1T-300 User Manual

5.1.7 Security Setting

Choose the operation mode you required, and then enter "Security Setting" by clicking the Setup button next to
it and the following page will be displayed. This section allows you to configure the wireless security settings.
Object
• Select Encryption

None
Authentication is disabled and no password/key is required to connect to the access point.

WEP
WEP (Wired Equivalent Privacy) is a basic encryption. For a higher level of security consider using the WPA
encryption.

Figure 5-9 Security Settings

Description
Select the encryption that you need.
None: No security required
WEP: Input 5, 13 (ASCII) or 10, 26 (HEX) character for
WEP key.
WPA: Enter ASCII characters between 8 and 63
character or 8 to 64 hexadecimal characters.
WPA2: Enter ASCII characters between 8 and 63
character or 8 to 64 hexadecimal characters.
WPA-Mixed: Enter ASCII characters between 8 and 63
character or 8 to 64 hexadecimal characters.
-40-