Figure 2-3 Bottom Panel; Figure 2-4 Poe Injector - Interlogix WMC252-1W-1T-300 User Manual

Bottom Panel
PoE Injector
Reset Button
H/W Interface Definition
Object
PoE LAN
(Passive PoE)
LAN 2

Figure 2-3 Bottom Panel

Figure 2-4 PoE Injector

10/100Mbps RJ45 port , auto MDI/ MDI-X and passive PoE supported
Connect LAN port to the PoE injector to power on the device.
Pin assignment:
Pin 4, 5 (+)
Pin 7, 8 (-)
Pin 3 (Reset)
10/100Mbps RJ45 port , auto MDI/ MDI-X
Connect this port to the network equipment.
※
When the option "Enable POE Pass Through" on the System
Management page is checked, the LAN2 can supply passive PoE power to the
second WMC252-300 or WMC252-300 through LAN 2.
-21-
Description