Samsung SRN-1000 User Manual page 83

Setting the network Connection without router
• Static
- Internet connection : Static IP, PPPoE, leased line, and LAN environments allows connection between the
NVR and remote user.
- NVR Network Settings : Set the <interface> in <network> menu of the connected NVR to <Static>.
Consult your network manager for IP, Gateway and Subnet Mask.
`
• dhCp
- Internet connection : Connect the NVR directly to a cable modem, DHCP, PPPoE modem or FTTH
network.
- NVR Network Settings : Set the <interface> in <network> menu of the connected NVR to <dhCp>.
If IP is not assigned within 1 minute, it is set to the previous static IP.
`
• pppoe
- Internet connection : An PPPoE modem is directly connected to the NVR, where the PPPoE connection
requires user ID and password.
- NVR Network Settings : Set the <interface> in <network> menu of the connected NVR to <pppoe>.
PPPoE <ID> and <Password> should be the same to the PPPoE user information.
`
If you don't know the ID and password, consult your PPPoE service provider.
English _83