3. Enter the password.
The initial administrator ID is "admin" and the password
should be set when logging in for the first time.
Please change your password every three months to safely protect
`
M
personal information and to prevent the damage of the information
theft.
Please, take note that it's a user's responsibility for the security
and any other problems caused by mismanaging a password.
4. Click [oK].
Auto network setup will be completed.
dynamic ip Setup
dynamic ip environment Setup
• Example of the Dynamic IP environment
- If a Broadband Router, with NVRs connected, is assigned an IP address by the DHCP server
- If connecting the NVR directly to modem using the DHCP protocols
- If IPs are assigned by the internal DHCP server via the LAN
Checking the dynamic ip
1. Run the IP Installer on the user's local machine to display
device allocated with <dynamic> IP addresses in the list.
2. Select a NVRs in the list, and click [manual Set] to check
the <dynamic> IP of the NVR.
If you uncheck <dhCp>, you can change IP to <Static>.
English _23