Samsung SRN-1000 User Manual page 64

menu setup
• IP : Provide the IP address of the camera.
• Device Port : Provide the device port of the camera.
• HTTP Port : Provide the HTTP port of the camera.
• ID : Provide the ID of the camera that you want to register.
• Password : Enter the password of the camera to be registered.
5. Select <onvif> or <rTSp> for the protocol and enter your input for each field appears.
• Target Service Address / RTSP URL : Enter the camera's RTSP access address that supports ONVIF or RTSP.
For more information about the RTSP address, refer to the manual of each applicable network camera.
• ID : Enter the ID for accessing via ONVIF/RTSP protocol.
• Password : Enter the password for accessing via ONVIF/RTSP protocol.
• Mode : Select a mode that is supported by the network camera in RTSP connection mode.
- TCP : The connection type with the network camera will switch to "RTP over TCP".
- UDP : The connection type with the network camera will switch to "RTP over UDP".
- HTTP : The connection type with the network camera will switch to "RTP over TCP (HTTP)".
6. Click the <register> button to register the selected camera.
if you want to check the error details of camera registration
If you failed to register a camera, the reason for the failure will be displayed.
• Connection failed due to unknown error. : This message appears if the camera has failed to be registered
due to unknown connection status.
• Connected successfully. : This message appears if the camera is connected successfully.
• incorrect model information. provide the correct model information. : This message appears if the
model information provided for registering the camera is incorrect.
• Authentication has failed : This message appears if the ID or password provided for registering the camera
is incorrect.
• Connection has failed due to excessive concurrent users. : This message appears if the concurrent user
count exceeds the upper limit.
• Connection has failed due to incorrect hTTp port information. : This message appears if the HTTP port
number of the camera is invalid.
• Connection has failed. unknown connection status. : This message appears if the camera has failed to
be connected due to a unknown error.
• user model modification : When registering a new camera, it is named according to the device's default if
user set the model to <Samsung network Camera/encoder>. In case if automatic registration fails, user
can change the model name of camera to be registered.
64_ menu setup