Samsung SRN-1000 User Manual page 68

menu setup
• No. : Shows the assigned number of the internal HDD.
To see the detailed positioning of the HDD according to the number, refer to <HDD Map>.
`
• Used/Total : Shows the used/total capacity of the storage device.
• Usage : Sets the storage device's usage.
You can select the eSATA HDD for extended storage
`
If disconnected an extended eSATA HDD storage device while operating, the system may restart.
`
J
• Status/Management : Display the status of the storage device.
• Temperature : You can check the temperature of HDD installed in NVR.
• HDD Map : Shows the internal HDD's locations according to assigned numbers.
Refer to this for servicing or additional HDD installation.
`
formatting
You can format a storage device.
• No. : Select the check box of the device to format.
• Used/Total : Shows the used/total capacity of the storage device.
• Usage : Sets the storage device's usage.
• Format : Select a device and press this to display the format confirmation dialog.
Press <oK> to start formatting the selected storage device.
Note that formatting the device will delete all of the existing recording data.
`
J
Note that no recording is made during formatting is in progress.
`
Do never remove the device to format until formatting is completed.
`
68_ menu setup