Samsung SRN-1000 User Manual page 70

menu setup
registering an iSCSi device manually
1. On the iSCSI screen, click <manual Add>.
2. On the Manual Add screen, enter the IP address, the connecting port, the ID and the password, and click
<oK>.
deregistering iSCSi device
1. Select the iSCSI device to be selected from IQN.
2. If you click <delete>, the DeleteWindow appears.
3. If you click <oK>, the iSCSI device is removed from the list.
Use Network Port 2 exclusively for iSCSI devices.
`
M
When using a hub to connect an iSCSI device with NVR, make sure to use the GIGA hub and to use an independent network
`
to save data normally.
In an iSCSI device, a logical drive must not exceed 16TB.
`
If you use CHAP authentication in a vessRAID, which is an iSCSI device that is compatible with NVR, you need to use the
`
iSCSI Manual Add function to connect to iSCSI.
If you access a single iSCSI device from multiple NVRs, a problem may occur.
`
If you change the setup of your iSCSI device while an NVR is connected to the iSCSI device, a problem may occur.
`
70_ menu setup