Connecting Web Viewer - Samsung SRN-1000 User Manual

ConneCTing weB viewer

1. Open your web browser and type the IP address or URL of
NVR into the URL address box.
"192.168.1.200" is set to IP by default.
`
M
Set to an available IP address in IP Installer or "Network >
`
Connection Mode".
The URL connection will be enabled only when the DDNS connection settings have been completed.
`
2. A user with the admin permissions should provide the admin
ID and password. A registered user should provide the user
ID and password.
The initial administrator ID is "admin" and the password should be
`
J
set when logging in for the first time. (Initial password of the Admin
user is set to "4321".)
ID allows alphanumeric characters only.
`
Password allows only alphanumeric letters and special characters other than <\> and <">.
`
Set password for your wireless network if you use the product with a wireless router. Being not protected with password or
`
using the default wireless router password may expose your video data to potential threat.
Please change your password every three months to safely protect personal information and to prevent the damage of the
`
information theft.
Please, take note that it's a user's responsibility for the security and any other problems caused by mismanaging a password.
It allow s up to 10 simultaneous access including the Admin and general users.
`
M
It does not allow multiple login of the Admin user.
`
Password of the Admin and general users can be changed in <Permission Management> menu of the NVR.
`
All settings are applied by the NVR's settings.
`
3. Click <install Activex Control...>.
4. When the installation confirm message appear, click [yes]
button.
English _27