Samsung SRN-1000 User Manual page 80

menu setup
Setting network Camera Sensor detection
• Sensor Operation : Sets whether to operate the network camera sensor connected to each channel.
• Cam : Select a channel to be connected to the sensor.
If selected camera, "Cam preset setup" window appears.
Select a channel and setup the preset.
Preset setup can be done in PTZ mode.
`
• Alarm out : Sets the alarm output method.
For further information on alarm output, refer to "HDD Alarm Setting". (Page 74)
`
• Duration : Sets the duration of alarm signal and alarm sound.
If the connected network camera that has configured the alarm in/out settings triggers an alarm, NVR will perform the alarm
`
M
out.
Camera event
You can set whether to react to camera events (motion detection, video analysis, audio events) and alarm
output / time.
• Mode : Select whether to react to camera events or not.
• Alarm Out : Sets the alarm output method.
For further information on alarm output, refer to "HDD Alarm Setting". (Page 74)
`
• Duration : Sets the duration of alarm signal and alarm sound.
The NVR generates alarm output only when the connected network camera is configured to detect events and an actual
`
M
event is detected.
80_ menu setup