Static Ip Setup - Samsung SRN-1000 User Manual

Item
Protocol
g
URL
h
IPv4
i
IPv6
j
Search
k
Auto Set
l
Manual Set
m
Exit
n
For the IP installer, use only the installer version provided in the installation CD or use the latest one if available.
`
M
You can download the latest version from the Samsung web site (www.samsungcctv.com).

Static ip Setup

manual network Setup
Run <ip installer_vx.xx.exe> to display the device search list.
At the initial startup, both [Auto Set] and [manual Set] will be grayed out.
1. Select a NVR in the search list.
Both the [Auto Set] and [manual Set] buttons will be
activated.
2. Click [manual Set].
The Manual Setting dialog appears.
The default values of <ip Address>, <Subnet mask>,
<gateway>, <hTTp port> and <port(TCp)> of the NVR
will be displayed.
If found multiple devices assigned with the same IP address, assign different IP addresses to such devices to avoid conflict.
`
J
If conflict has been occurred by sharing the same IP address by multiple devices, recovering may take some time.
`
3. In the <Address> pane, provide the necessary information.
• MAC (Ethernet) Address : The MAC (Ethernet) address of
the applicable NVR will be set automatically so you don't
need to input it manually.
You can configure the static IP settings only if the DHCP checkbox
`
M
is unchecked.
Network setting for the device.
The factory default is "IPv4".
Devices with the IPv6 setting will be displayed "IPv6".
DDNS URL address enabling access from the external Internet.
However, this will be replaced with the <IP Address> of the device if DDNS registration has failed.
Scans for devices with the IPv4 setting.
Scans for devices with the IPv6 setting.
Scans for devices that are currently connected to the network.
However, this button will be grayed out if neither IPv4 nor IPv6 is checked.
The IP Installer automatically configures the network settings.
You should configure the network settings manually.
Exits the IP Installer program.
Description
English _21