Samsung SRN-1000 User Manual page 101

Hide thumbs Also See for SRN-1000:
Table of Contents

Advertisement

Problem
Not all of multiple external HDDs that I have installed
on the NVR are recognized by the NVR even if I
configured the necessary settings properly.
The time bar is not displayed in Search mode.
The "NO HDD" icon and an error message are
displayed.
The front LEDs (ALARM, REC) keep blinking after
booting up the system.
I have installed an additional HDD on the NVR but it
does not recognize the HDD.
I have connected an external storage device (external
eSATA HDD) to the NVR but the NVR seems not to
recognize it.
If I press the ESC key in full screen mode of the
WebViewer, the system does not switch to a normal
split mode.
I forgot the password.
y It may take time to recognize multiple external HDDs.
Try again in a minute. If the problem persists and not all of the external HDDs
are recognized, that is highly likely to an error of the external HDD it self.
Try with a different HDD or HDDs.
y The timeline can switch between normal and extension mode.
In extension mode, the time bar may not be displayed in the current timeline.
Switch to normal mode or use the left or right button to navigate through the
time bar.
y Check the HDD for connection.
If the problem persists in a normal condition, contact the nearest service
center to have the HDD checked by the service personnel.
y The front LEDs (NO HDD, HDD FAIL or FAN ERROR) keep blinking.
- You can check the description about corresponding failure on top left
side of the Live screen after connecting.
y See the compatibilty list to check if the additional HDD is supported by the
NVR. For the compatibility list, contact the retailer where you purchased the
NVR.
y See the compatibility list of external storage devices to check if the connected
device is supported by the NVR. For the compatibility list, contact the retailer
where you purchased the NVR.
y Press the ALT+TAB keys to select 'ACTIVE MOVIE' and press the ESC key
again. The system will switch to a normal split mode.
y Contact the NVR administrator for help.
Action
English _101

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents