Manage User Access To Settings And Features - Polycom realpresence group series Administrator's Manual

Setting
Enable Diagnostics Port Idle
Session Timeout
Enable API Port Idle Session
Timeout
Enable SNMP Access
Allow Video Display on Web
(local interface only)
Lock Port after Failed Logins
Enable Whitelist
Idle Session Timeout in Minutes
(web interface only)
Maximum Number of Active
Sessions
(web interface only)

Manage User Access to Settings and Features

You can allow users to change common user preferences by providing access to the User Settings screen.
To allow users to customize the workspace, select the Allow Access to User Settings option to make the
User Settings choice on the Settings screen available to users on the local interface's Home screen.
If the Polycom RealPresence Group system is paired with a Polycom Touch Control, selecting Allow
Access to User Settings makes the RealPresence Group Series system tab available on the Touch
Control User Settings screen.
User Settings contains the following options, most of which are also available to administrators under Admin
Settings. These settings are not available in the Maximum Security Profile unless otherwise noted.
● Meeting Password (available in the Maximum Security Profile)
● Backlight Compensation (available in the Maximum Security Profile)
● Mute Auto-Answer Calls
● Allow Other Participants in a Call to Control Your Camera
● Auto Answer Point-to-Point Video
● Auto Answer Multipoint Video
● Allow Video Display on Web
Polycom, Inc.
Description
Specifies whether to allow the diagnostics port to time out at the configured
time interval or not. The timeout setting is set under Idle Session Timeout
in Minutes.
Specifies whether to allow the API port to time out at the configured time
interval or not. The timeout setting is set under Idle Session Timeout in
Minutes.
Specifies whether to allow remote access to the system by SNMP.
Specifies whether you can use the Polycom RealPresence Group system
web interface to view the room where the system is located, or video of
calls in which the system participates.
Note: This feature activates both near site and far site video displays in
Web Director.
For information about this setting, refer to
Specifies whether to enable a whitelist. For more information about this
setting, refer to Enable a Whitelist and Add IP
Specifies the number of minutes your web interface session can be idle
before the session times out.
Specifies the maximum number of users who can be logged in to and using
your system through telnet or the web interface at the same time.
Port Lockout.
Addresses.
Security
116