Setting An Account Lockout; Managing User Access To Settings And Features - Polycom QDX 6000 System Administrator's Manual

Administrator Guide for Polycom QDX 6000 System

Setting an Account Lockout

Managing User Access to Settings and Features

8 - 10
You can configure and enforce an account lockout if someone fails to log in
correctly. After a certain number of failed login attempts, the account is locked
for an amount of time specified by the administrator.
To configure the account lockout feature:
1. Go to System > Admin Settings > General Settings > Security >
Account Management.
2. Select Admin Account or User Account.
3. Configure these settings on the Admin Account or User Account screen:
Setting
Lock Account after
Failed Logins
Account Lock
Duration in
Minutes
You can manage user access to settings and features by using passwords and
by configuring the system to show only those options you want your users to
see.
Security Level
High
(Kiosk mode)
High
(User login mode)
Description
Specifies the number of failed login attempts allowed before
the system locks the account. If set to Off, the system will
not lock the user account due to failed login attempts.
Specifies the amount of time that the account remains
locked due to failed login attempts.
Restrictions
An administrator login is required to configure system
Admin Settings. Users can call only the numbers you
specify on the home screen.
See Customizing the Home Screen
An administrator login is required to configure system
Admin Settings. A user login is required to use the system.
on page 7-3.