Manage User Access To Settings And Features - Polycom realpresence group series Administrator's Manual

Setting
Restrict to HTTPS
Web Access Port (HTTP)
Enable Telnet Access
Enable SSH Access
API Port
Enable Diagnostics Port Idle
Session Timeout
Enable API Port Idle Session
Timeout
Enable SNMP Access
Allow Video Display on Web
(local interface only)
Lock Port after Failed Logins
Enable Whitelist
Idle Session Timeout in Minutes
(web interface only)
Maximum Number of Active
Sessions
(web interface only)

Manage User Access to Settings and Features

You can allow users to change common user preferences by providing access to the User Settings screen.
Polycom, Inc.
Description
Specifies that the web server is accessible only over a secure HTTPS port.
Enabling this setting closes the HTTP port and so disables redirects of
sessions from HTTP to HTTPS (all access must be initiated as HTTPS).
Specifies the port to use when accessing the system using the Polycom
RealPresence Group system web interface using HTTP.
If you change this from the default (port 80), specify a port number of 1025
or higher, and make sure the port is not already in use. You will need to
include the port number with the IP address when you use the Polycom
RealPresence Group system web interface to access the system. This
makes unauthorized access more difficult.
If Restrict to HTTPS is enabled, the Web Access Port setting is
unavailable.
Specifies whether to allow remote access to the system by telnet.
Specifies whether to allow SSH access. For more information about this
setting, refer to Secure API
Specifies the port for API access. Select port 23 or 24.
If you set the API port to port 23, the diagnostics port changes to port 24.
Specifies whether to allow the diagnostics port to time out at the configured
time interval or not. The timeout setting is set under Idle Session Timeout
in Minutes.
Specifies whether to allow the API port to time out at the configured time
interval or not. The timeout setting is set under Idle Session Timeout in
Minutes.
Specifies whether to allow remote access to the system by SNMP.
Specifies whether you can use the Polycom RealPresence Group system
web interface to view the room where the system is located, or video of
calls in which the system participates.
Note: This feature activates both near site and far site video displays in
Web Director.
For information about this setting, refer to
Specifies whether to enable a whitelist. For more information about this
setting, refer to Enable a Whitelist and Add IP
Specifies the number of minutes your web interface session can be idle
before the session times out.
Specifies the maximum number of users who can be logged in to and using
your system through telnet or the web interface at the same time.
Access.
Port Lockout.
Addresses.
Security
135