Storing Positions Into Memory; Recalling Positions From Memory - Mercedes-Benz 2006 CL 500 Operator's Manual

The memory button and stored position
switch are located on the door.
1 Stored position button
M Memory button M
Switch on the ignition ( page 34).
or
Open the respective door.

Storing positions into memory

Adjust the seats, steering wheel and
exterior mirrors to the desired position
( page 37).
Press memory button M.
Release memory button M and push
one of the position buttons 1 within
3 seconds.
All the settings are stored with the se-
lected position.
Controls in detail
Memory function

Recalling positions from memory

!
Do not operate the power seats using
the memory button if the seat backrest
is in an extremely reclined position. Do-
ing so could cause damage to front or
rear seats.
First move seat backrest to an upright
position.
Press and hold one of the position
buttons 1 until the seat, steering
wheel and exterior mirrors have fully
moved to the stored positions.
i
Releasing the button immediately
stops movement to the stored posi-
tions.
123