Mercedes-Benz 2006 CL 500 Operator's Manual page 99

Controls in detail
Locking and unlocking
Selective setting
If you frequently travel alone, you may wish
to reprogram the SmartKey with
KEYLESS-GO so when you, grasp the driv-
er's outside door handle only the driver's
door and the fuel filler flap unlocks.
Press and hold buttons Œ and ‹
simultaneously for about 6 seconds un-
til battery check lamp 5 flashes twice.
The SmartKey with KEYLESS-GO will
then function as follows:
Unlocking driver's door and fuel filler
flap
Grasp the driver's outside door handle.
All turn signal lamps flash once. The
locking knob in the driver's door moves
up. The anti-theft alarm system is dis-
armed.
98
Global unlocking
Grasp the outside door handle on the
passenger side.
All turn signal lamps flash once. The
locking knobs in the doors move up.
The anti-theft alarm system is dis-
armed.
Global locking
Press lock button on an outside door
handle ( page 60).
With the trunk and all doors closed, all
turn signal lamps flash three times. The
locking knobs in the doors move down.
The anti-theft alarm system is armed.
i
You can also lock the vehicle using the
lock button on the trunk lid ( page 99)
or, vehicles with trunk opening/closing
system*, KEYLESS-GO locking/closing
switch ( page 107).
Restoring to factory setting
Press and hold buttons Œ and ‹
simultaneously for about 6 seconds un-
til battery check lamp 5 flashes twice.
!
If you can no longer lock or unlock the
vehicle with the SmartKey with
KEYLESS-GO, then the battery of the
SmartKey with KEYLESS-GO is dis-
charged, the SmartKey with
KEYLESS-GO is malfunctioning or the
vehicle battery is drained.
Check the battery of the SmartKey
with KEYLESS-GO and replace them
if necessary ( page 377).
Use the mechanical key to unlock
the driver's door ( page 372) and
the trunk ( page 373).
Use the mechanical key to lock the
driver's door ( page 372).