Mercedes-Benz 2006 CL 500 Operator's Manual page 117

Controls in detail
Seats
Folding down and placing upright rear
power head restraints with the switch
in the rear center console
You can fold the rear power head restraints
backward or place them upright using the
rear head restraint switch in the rear cen-
ter console.
1 Place rear head restraint upright
2 Fold rear head restraint down
116
Switch on the ignition ( page 34).
Push upper half 1 of switch to place
the head restraints upright.
Push lower half 2 of switch to fold the
head restraints down.
Warning!
For safety reasons, always drive with the
rear head restraints in the upright position
when the rear seats are occupied.
Keep the area around head restraints clear
of articles (e.g. clothing) to not obstruct the
folding operation of the head restraints.
Head restraint tilt
You can adjust the angle manually by pull-
ing or pushing the head restraints by hand.
i
Adjust the head restraint in such a way
that it is as close to the head as possi-
G
ble.