Control System; Multifunction Display - Mercedes-Benz 2006 CL 500 Operator's Manual

Control system

The control system is activated as soon as
the SmartKey in the starter switch is
turned to position 1 or as soon as the
KEYLESS-GO* start/stop button
( page 35) is in position 1. The control
system enables you to:
call up information about your vehicle
change vehicle settings
For example, you can use the control sys-
tem to find out when your vehicle is next
due for service, to set the language for
messages in the instrument cluster dis-
play, and much more.
i
The displays for the audio systems
(radio, CD player etc.) will appear in
English, regardless of the language
selected.
Warning!
A driver's attention to the road and traffic
conditions must always be his/her primary
focus when driving.
For your safety and the safety of others, se-
lecting features through the multifunction
steering wheel should only be done by the
driver when traffic and road conditions per-
mit it to be done safely.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approxi-
mately 14 m) every second.
The control system relays information to
the multifunction display.
Controls in detail

Multifunction display

G
1 Trip odometer
2 Main odometer
Control system
137