Controls in detail
Memory function*
The memory button and memory position
switch are located on the outer side of
each seat.
1 Memory button M
2 Memory position switch
Switch on the ignition ( page 35).
or
Open the respective door.
104
Storing positions into memory
Adjust the seat, on the driver's side
also the steering wheel and exterior
rear view mirrors, to the desired posi-
tions ( page 37).
Press memory button M 1.
Release memory button M 1 and
press a memory position switch 2
within three seconds.
All settings are stored to the selected
position.
Recalling positions from memory
!
Do not operate the power seats using
the memory position switches if the
seat backrest is in an excessively re-
clined position. Doing so could cause
damage to the seats.
Press and hold desired memory posi-
tion switch 2 until the seat, on the
driver's side also the steering wheel
and exterior rear view mirrors, have
completely moved to the stored posi-
tions.
i
Releasing the memory position switch-
es immediately stops movement to the
stored positions.