Storing Positions Into Memory; Recalling Positions From Memory - Mercedes-Benz G 500 Operator's Manual

The memory button and memory position
button are located on each front door.
Memory button
1
1, 2, 3 Memory position button
Switch on the ignition ( page 39).
or
Open the respective door.

Storing positions into memory

Adjust the seats ( page 42).
On the driver's side, additionally adjust
the steering wheel ( page 44) and
exterior rear view mirrors ( page 46)
to the desired positions.
Press memory button 1.
Release memory button 1 and press
memory position button 1, 2, or 3 with-
in 3 seconds.
All settings are stored to the selected
position.
Controls in detail
Memory function

Recalling positions from memory

!
Do not operate the power seats using
memory button 1 if the seat backrest is in an
excessively reclined position. Doing so could
cause damage to front or rear seats.
Move seat backrest to an upright position first.
Press and hold memory position
button 1, 2, or 3 until the seat, steering
wheel and exterior rear view mirrors
have fully moved to the stored posi-
tions.
i Releasing the memory position button stops
movement to the stored positions immediately.
115