Manual Shift Program - Mercedes-Benz 2006 CL 500 Operator's Manual

Controls in detail
Automatic transmission
i
You cannot shift with the steering
wheel gearshift buttons when the gear
selector lever is in position P, N or R.
The last selected program
mode (C or S) is switched on when the
engine is restarted in the automatic
program mode.
The following instructions describe opera-
tion of the steering wheel gearshift control
when driving in the automatic program
mode C or S.
For instructions on operating the steering
wheel gearshift control and gear selector
lever in the manual program mode M, see
"Manual shift program CL 55 AMG and
CL 65 AMG" ( page 175).
174
Downshifting
Warning!
On slippery road surfaces, never downshift
in order to obtain braking action. This could
result in drive wheel slip and reduced
vehicle control. Your vehicle's ABS will not
prevent this type of loss of control.
Briefly press button 1 on the left side
of the steering wheel.
The transmission will shift to the next
lower gear as permitted by the shift
program. This action simultaneously limits
the gear range of the transmission
( page 170) when you are driving in the
automatic program mode (C or S).
Upshifting
Briefly press button 2 on the right
side of the steering wheel.
The transmission will shift to the next
higher gear as permitted by the shift
G
program. This action simultaneously
extends the gear range of the transmission
when you are driving in the automatic
program mode (C or S).
Canceling gear range limit
Press and hold button 2 on the right
side of the steering wheel until
reappears in the tachometer display.
The transmission will shift from the current
gear range directly to gear range D.
Shifting into optimal gear range
Press and hold button 1 on the left
side of the steering wheel.
The transmission will automatically select
the gear range suited for optimal
acceleration and deceleration. This may
involve shifting down one or more gears.
D