Storing positions into memory
Adjust the seats, steering wheel and
exterior rear view mirrors to the
desired position ( page 40).
Turn memory position switch 2 to the
desired memory position.
Press memory button 1.
Release memory button 1 and press
memory position switch 2 within
three seconds.
All settings are stored to the selected
position.
Recalling positions from memory
!
Do not operate the seats using the memory
button if the seat backrest is in an excessively re-
clined position. Doing so could cause damage to
front or rear seats.
First move the seat backrest to an upright posi-
tion.
Turn memory position switch 2 to the
desired memory position.
Press and hold memory position
switch 2 until the seat, steering wheel
and exterior rear view mirrors have
completely moved to the stored
positions.
Controls in detail
Memory function
i
Releasing the memory position switch stops
movement to the stored positions immediately.
127