Mercedes-Benz 2006 CL 500 Operator's Manual page 389

Practical hints
Flat tire
Take the two-piece wheel wrench out
of the vehicle tool kit tray. Assemble
wheel wrench.
On wheel to be changed, loosen but do
not yet remove the wheel bolts (ap-
proximately one full turn with wrench).
The tube openings are located directly be-
hind the front wheel housings and in front
of the rear wheel housings.
388
1 Jack support tube cover
Move cover 1 toward rear by pressing
at point indicated by arrow.
Remove cover 1 carefully to avoid
damage to the locking tabs.
1 Jack arm
2 Jack support tube hole
3 Crank
Insert jack arm 1 fully into tube
hole 2 up to the stop.
Warning!
Insert the jack arm fully into the jack sup-
port tube hole up to the stop. Otherwise the
vehicle may fall off the jack and cause per-
sonal injury or damage to the vehicle.
G