Synchronizing The Power Windows - Mercedes-Benz 2006 CL 500 Operator's Manual

Fully closing the power windows
(Express-close)
Press switch 1 to 2 at the
symbol j past the resistance point
and release.
The corresponding window closes com-
pletely.
Warning!
Driver's door only:
If within 5 seconds you again press the
switch past the resistance point and re-
lease, the automatic reversal will not func-
tion.
!
If the upward movement of the door
window is blocked during the closing
procedure, the door window will stop
and open slightly. Remove the obstruc-
tion, press the respective door window
switch at the symbol j again past
the resistance point and release. If the
door window still does not close when
G
there is no obstruction, press and hold
the respective door window switch at
the symbol j. The door window will
then close without the obstruction sen-
sor function.
Stopping power windows during
Express-operation
Briefly press the respective window
switch again.
Controls in detail
Power windows

Synchronizing the power windows

The windows must be synchronized each
time
after the battery has been disconnect-
ed
if the windows cannot be fully opened
(Express-open) or closed
(Express-close)
Each window must be synchronized.
Close all doors.
Switch on the ignition ( page 34).
Press and hold switches 1 to 4 at
the symbol j until the windows are
completely closed.
Hold on to switches 1 to 4 for ap-
proximately 1 second.
The windows are synchronized.
199