Table of Contents
Advertisement
Installing towing eye bolt
1 Cover on right side of front bumper.
2 Cover on right side of rear bumper.
Practical hints
Towing the vehicle
Removing cover
Press mark on cover in direction of
arrow.
Lift cover off to reveal threaded hole for
towing eye bolt.
The towing eye bolt is supplied with the
tool kit (located in the compartment under-
neath the trunk floor).
Screw towing eye bolt in to its stop and
tighten with lug wrench.
Reinstalling cover
Fit cover and snap into place.
331
Advertisement
Table of Contents
