Installing Towing Eye Bolt - Mercedes-Benz 2007 CLK-Class Coupe Operator's Manual

Installing towing eye bolt

Towing eye bolt CLK 350
1 Cover on right side of front bumper
2 Cover on right side of rear bumper
To remove cover:
Press mark on cover 1 or 2.
Lift cover off to reveal the threaded
hole for towing eye bolt.
Practical hints
Towing the vehicle
The towing eye bolt is supplied with the
tool kit (located in the compartment under-
neath the trunk floor).
Screw towing eye bolt in to its stop and
tighten with lug wrench.
To reinstall cover:
Fit cover 1 or 2 and snap into place.
429