Table of Contents
Advertisement
Technical data
Fuels, coolants, lubricants, etc.
Windshield washer and headlamp
cleaning* system
Both the windshield and headlamp washer
systems are supplied from the windshield
washer fluid reservoir.
The washer fluid reservoir has a capacity of
approx.:
3.2 US qt (3.0 l) in vehicles without
headlamp cleaning system*
6.4 US qt (6.0 l) in vehicles with
headlamp cleaning system*
358
Refill the reservoir with MB Windshield
Washer Concentrate "S" and water
(or concentrate and commercially
available premixed windshield washer
solvent/antifreeze, depending on
ambient temperatures).
Warning!
Washer solvent/antifreeze is highly flamma-
ble. Do not spill washer solvent/antifreeze
on hot engine parts, because it may ignite
and burn. You could be seriously burned.
Windshield and headlamp washer fluid
mixing ratio
For temperatures above freezing, use
MB Windshield Washer Concentrate "S"
and water:
1 part "S" to 100 parts water
G
[40 ml "S" to 1 gallon (4.0 liters) water]
For temperatures below freezing, use
MB Windshield Washer Concentrate "S"
and commercially available premixed
windshield washer solvent/antifreeze:
1 part "S" to 100 parts solvent
[40 ml "S" to 1 gallon (4.0 liters) solvent]
Advertisement
Table of Contents
