Table of Contents
Advertisement
Safety and Security
Occupant safety
Installation of infant and child restraint
systems
This vehicle is equipped with tether an-
chorages for a top tether strap at each of
the rear seating positions.
1 Cover of top anchorage ring
Make sure the rear backrest is locked
in its upright position ( page 213).
68
Warning!
Always lock backrest in its upright position
when rear seat bench is occupied by pas-
sengers, or the extended cargo area is not in
use. Check for secure locking by pushing
and pulling on the backrest.
Remove cover 1 from anchorage
ring 3.
Guide tether strap between head
restraint and top of seat back.
Head restraint must be installed (if
removable) and positioned such that
the top tether strap can pass freely
between the head restraint and top of
seat back.
Make sure the tether strap is not
twisted.
G
2 Hook
3 Anchorage ring
Securely fasten hook 2, which is part
of the tether strap, to anchorage
ring 3.
i
For safety, make sure the hook has
attached to the ring beyond the safety
catch, as illustrated.
Reinstall cover 1 after removing the
tether strap.
Advertisement
Table of Contents
