Table of Contents
Advertisement
Selecting display (speed display or
outside temperature)
Move the selection marker with
the æ or ç button to the
INSTRUMENT CLUSTER
submenu.
Press button j or k repeatedly
until you see this message in the
display:
SELECT DISPLAY
.
The selection marker is on the current
setting.
Press æ or ç to select the
display permanently shown in the
multifunction display.
Lighting submenu
Access the
LIGHTING
submenu via the
SETTINGS
menu. Use the
LIGHTING
submenu to change the lamp and lighting
settings on your vehicle. The following
functions are available:
Function
Set daytime running lamp mode
(USA only)
Set locator lighting
Exterior lamps delayed shut-off
Interior lighting delayed shut-off 132
Controls in detail
Setting daytime running lamp mode
(USA only)
Move the selection marker with
the æ or ç button to the
LIGHTING
submenu.
Press button j or k repeatedly
until you see this message in the
Page
display:
LIGHT CIRCUIT HEADLIGHT
129
MODE
.
The selection marker is on the current
130
setting.
131
Press æ or ç to select manual
or daytime running lamp (constant)
mode. This function is not available in
countries where daytime running
lamps are mandatory.
Control system
129
Advertisement
Table of Contents
