Mercedes-Benz 2004 C 230 Kompressor Sport Operator's Manual page 313

Parking and standing lamp bulb
Switch off the lights.
Open the hood ( page 252).
Press the clamp and remove headlamp
cover 2.
Pull out bulb socket 6 with the bulb.
Pull the bulb out of bulb socket.
Insert a new bulb in the socket.
Reinstall bulb socket.
Align headlamp cover 2 and click into
place.
Bi-Xenon* headlamps
Warning!
Do not remove the cover 3 for the
Bi-Xenon headlamp. Because of high voltage
in Bi-Xenon lamps, it is dangerous to replace
the bulb or repair the lamp and its compo-
nents. We recommend that you have such
work done by a qualified technician.
1 Bulb socket for turn signal lamp
2 Headlamp cover for high beam flasher,
parking and standing lamp
3 Cover for Bi-Xenon lamp
Practical hints
Replacing bulbs
G
4 High beam flasher bulb
5 Bayonet socket for high beam flasher
bulb
6 Bulb socket for parking and standing
lamp bulb
High beam bulb
Switch off the lights.
Open the hood ( page 252).
Press the clamp and remove lamp
cover 2.
Pull electrical connector 4 off.
313