Table of Contents
Advertisement
Practical hints
Where will I find ...?
The vehicle jack is located in the storage
compartment underneath the trunk floor
together with the vehicle tool kit in the
vehicle tool kit storage well casing.
Storage position
Remove vehicle jack from its
compartment.
Push crank handle up.
302
Operational position
Turn crank handle clockwise until it
engages (operational position).
Before storing the vehicle jack in its
compartment:
It should be fully collapsed.
The handle must be folded in (storage
position).
Minispare wheel
The Minispare wheel is located in the
storage compartment underneath the
trunk floor.
Removing the Minispare wheel
Lift up trunk floor cover and engage
trunk floor handle in upper edge of
trunk.
Loosen the retaining screw
( page 300) in the middle of storage
well casing.
Remove the storage well casing
( page 300).
Advertisement
Table of Contents
