Installing Towing Eye Bolt - Mercedes-Benz S 450 4MATIC Operator's Manual

Practical hints
Towing the vehicle

Installing towing eye bolt

1 Cover on right side of front bumper
1 Cover on right side of rear bumper
740
Removing cover
Press mark on cover 1 in the direction
of arrow.
Lift cover off to reveal the threaded
hole for towing eye bolt.
Installing towing eye bolt
Take towing eye bolt and wheel wrench
out of the vehicle tool kit in the trunk
( page 705).
Screw towing eye bolt clockwise into
its stop and tighten with wheel wrench.
Removing towing eye bolt
Loosen towing eye bolt counterclock-
wise with wheel wrench.
Unscrew towing eye bolt.
Store towing eye bolt and wheel
wrench in the vehicle tool kit in the
trunk.
Installing cover
Fit cover 1 and snap into place.