Table of Contents
Advertisement
Controls in detail
Seats
!
Make sure the head restraints engage
when placing them upright. Otherwise
their protective function cannot be as-
sured.
Head restraint tilt
Two different head restraint angle
positions are available.
Press the release button ( page 95)
and tilt the head restraint to the
desired position.
96
Removing and installing rear seat head
restraints (outer seats)
Warning!
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the head re-
straint supports the back of the head at eye
level. This will reduce the potential for injury
to the head and neck in the event of an ac-
cident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
Do not interchange head restraints from
front and rear seat.
!
The center rear seat head restraint
cannot be removed.
G
1 Release button
Removing rear seat head restraints
Fold back head restraint ( page 95).
Pull head restraint to its highest
position.
Push release button 1 and pull out
head restraint.
Advertisement
Table of Contents
