Installing Towing Eye Bolt - Mercedes-Benz CLS500 Operator's Manual

Cls-class
Hide thumbs Also See for CLS500:
Table of Contents

Advertisement

Practical hints
Towing the vehicle
!
When towing the vehicle with all wheels
on the ground, please note the follow-
ing:
With the automatic central locking acti-
vated and the SmartKey in starter
switch position 2, or KEYLESS-GO*
start/stop button in position 2, the ve-
hicle doors lock if the left front wheel
as well as the right rear wheel are turn-
ing at vehicle speeds of approximately
9 mph (15 km/h) or more.
Switch off the tow-away alarm
( page 88).
To prevent the vehicle door locks from
locking, deactivate the automatic cen-
tral locking ( page 115).
Towing of the vehicle should only be
done using the properly installed tow-
ing eye bolt. Never attach tow cable,
tow rope or tow rod to the vehicle chas-
sis, frame or suspension parts.
410
i
The selector lever will remain locked in
position P and the SmartKey will not
turn in the starter switch if the battery
is disconnected or discharged. For
more information see "Battery"
( page 402) or "Jump starting"
( page 406).
Manual unlocking of the transmission
selector lever ( page 381).

Installing towing eye bolt

Front of vehicle
1 Cover on right side of front bumper
To remove cover:
Press mark on cover in direction of ar-
row.
Lift cover off to reveal threaded hole for
towing eye bolt.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cls55 amg

Table of Contents