Table of Contents
Advertisement
Controls in detail
Control system
Instrument cluster submenu
Access the
INSTRUMENT CLUSTER
via the
SETTINGS
menu. Use the
INSTRUMENT CLUSTER
submenu to change
the instrument cluster display settings.
The following functions are available:
Function
Set time (hours)
Set time (minutes)
Select time display mode
Select temperature display
mode
Select speedometer display
mode
Select language
Select display (speed display or
outside temperature)
126
Set time (hours)
submenu
This function can only be seen with audio
system.
i
Vehicles with COMAND*:
For information on setting the time,
Page
refer to the separate COMAND
126
operating instructions.
126
Move the selection marker with
127
the æ or ç button to the
127
INSTRUMENT CLUSTER
Press button j or k repeatedly
128
until you see this message in the
display:
TIME SETTINGS – HOURS
128
129
The selection marker is on the hour
setting.
Press æ or ç to set the hour.
Set time (minutes)
This function can only be seen with audio
submenu.
system.
i
Vehicles with COMAND*:
.
For information on setting the time,
refer to the separate COMAND
operating instructions.
Move the selection marker with
the æ or ç button to the
INSTRUMENT CLUSTER
submenu.
Advertisement
Table of Contents
