Return To Stand-By Mode - Ricoh M016 Service Manual

Energy Save

Return to Stand-by Mode

Energy Saver Mode1
Recovery time: 10 sec.
Energy Saver Mode2
Recovery time: 23 sec.
Recommendation
We recommend that the default settings should be kept.
If the customer requests that these settings should be changed, please explain that
their energy costs could increase, and that they should consider the effects on the
environment of extra energy use.
If it is necessary to change the settings, please try to make sure that the Energy Saver
Mode2 Timer is not too long. Try with a shorter setting first, such as 30 min., then go to
a longer one (such as 60 min.) if the customer is not satisfied.
If the timers are all set to the maximum value, the machine will not begin saving energy
until 240 minutes has expired after the last job. This means that after the customer has
finished using the machine for the day, energy will be consumed that could otherwise
be saved.
M016/M017 7-2 SM