Ricoh M016 Service Manual page 201

Tray/Paper Selection Error
No paper in the tray or tray not set in the machine
030 Paper size requested by the job does not match the paper in the tray
1. Install the tray or put the correct size paper in the tray.
2. Check the paper setting in the user menu mode.
Paper Selection Error: Feed and Exit
Paper size requested by the job does not match the paper in the tray
031
Selection error for the paper feed and paper exit location in duplex mode
Check the paper feed and exit location in the user menu mode.
Jam Error: No Feed from Tray 1
050 Paper slipped
Remove the paper jam at tray 1.
Jam Error: No Feed from Optional Tray
052 Paper slipped
Remove the paper jam at the optional tray (Tray 2).
Inner Jam Error: Registration/ Paper Exit
A sheet of paper stays at the registration sensor or paper exit sensor.
055 Paper slipped
Paper double feed
Remove the paper jam at the registration sensor or paper exit sensor.
SM Appendix 3-3
Error Messages
M016/M017