Ricoh M016 Service Manual page 126

Service Program Mode
Fax Maintenance
RX Settings
RX Settings
M016/M017
Silence (No tone) detection time (Rx mode :
FAX/ TAD Only)
After the line is connected via the external
Silence
telephone, the machine can detect silence (no
Detection Time
tone) for the time length specified by this
setting.
[30 sec (Default)]
CNG tone detection time ( RX mode : FAX /
TEL, FAX / TAD Only)
After the line is connected via the external
CNG Tone
telephone, the machine can detect a CNG
Detection Time
signal for the time length specified by this
setting.
[5 Sec (Default)/ 10 Sec]
Number of CNG cycles to be detected
CNG Cycles This setting is only effective for FAX/TAD mode.
[1.5 Cycle (Default)/ 2.0 Cycle]
Determines the period when tones from the line
Tone Sound are monitored.
Monitoring [No Monitoring/ Up To Phase B (Default)/ All TX
Phases]
Pressing the Stop/Clear key can stop the
current receiving operation. Received data is
Stop/Clear key
lost.
[Not Functional (Default)/ Functional]
5-14 SM