Ricoh M016 Service Manual page 116

Service Program Mode
Engine Maintenance
Vert. Tray2 Plain
Paper
Vert. Tray2 Thin
Paper
Vert. Tray2 Thick
Paper
Horiz.Bypass
Vert. Bypass
Plain Paper
Registration
Vert. Bypass
Thick Paper
Vert. Bypass Thin
Paper
M016/M017
Adjusts the vertical registration of plain paper for tray
2. If the machine settings are reset to the factory
defaults, this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Adjusts the vertical registration of thin paper for tray
2. If the machine settings are reset to the factory
defaults, this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Adjusts the vertical registration of thick paper for tray
2. If the machine settings are reset to the factory
defaults, this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Adjusts the horizontal registration for the bypass
tray. If the machine settings are reset to the factory
defaults, this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Adjusts the vertical registration of plain paper for the
bypass tray. If the machine settings are reset to the
factory defaults, this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Adjusts the vertical registration of thick paper for the
bypass tray. If the machine settings are reset to the
factory defaults, this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
Adjusts the vertical registration of thin paper for t the
bypass tray. If the machine settings are reset to the
factory defaults, this value does not change.
[-40 to 40 / 0 (Default) / 0.1 mm/step]
5-4 SM