Ricoh M016 Service Manual page 138

Firmware Updating
3. Make a folder on a local drive of your computer and save the files there.
"FWUpdate ToolSP.exe": Used for Controller firmware or Engine firmware
"FWUpdate Tool.exe": Used for Controller firmware
4. Connect a USB cable between a computer and the machine.
5. Click the "FWUpdateToolSP.exe" or "FWUpdateTool.exe" file to execute the updating
program.
6. For a USB connection, click "F/W Update (USB)" [A]. For a network connection, enter
the machine's IP address in "MFP IP Address" [B], and then click "F/W Update (NET)"
[C].
7. The message "Download complete" appears.
Do not turn the main power off from this point until the update procedure is
completed.
8. The following message appears on the screen:
"Firmware is Updating ..."
9. Wait until the update is finished.
Do not touch the machine during updating!
10. The update is finished when "Firmware Update Done. Please Reboot" appears on the
operation panel's display.
11. Turn the main power of the machine off, and then turn it back on.
12. Print a configuration page to check the machine's firmware version.
M016/M017 5-26 SM