Ricoh M016 Service Manual page 130

Service Program Mode
Fax Maintenance
V34 Settings
M016/M017
These selectors set the equalizer's training
level to be applied if training fails due to poor
Equalizer
line connection.
[Automatic (Default)/ 4 Points/ 16 Points]
Resend when a communication error occurs.
Redialing
[Disabled (Default)/ Not Disabled]
Sets the first transmission speed choice, before
fallback.
[2400 Bps/ 4800 Bps/ 7200 Bps/ 9600 Bps
First TX Speed
/ 12000 Bps/ 14400 Bps/ 16800 Bps/ 19200
Bps/ 21600 Bps/ 24000 Bps/ 26400 Bps/ 28800
Bps/ 31200 Bps/ 33600 Bps (Default)]
This setting limits the transmission speed range
in V.34 mode by masking the desired symbol
rate(s).
Symbol Rate
[Not Used (Default)/ 3429 Sym/Sec
/ 3200 Sym/Sec/ 3000 Sym/Sec
/ 2800 Sym/Sec/ 2400 Sym/Sec]
5-18 SM