Email Server Setting Items - Epson WF R8591 User Manual

User's Guide
1. Enter Setup from the home screen.
2. Select System Administration > Wi-Fi/Network Settings > Advanced Setup.
3. Select Email Server > Server Settings.
4. Select the authentication method.
Select the authentication method of the email server you are using.
Important:
c
The following authentication methods are available. SSL and STARTTLS are not supported.
❏ None
❏ SMTP (SMTP AUTH)
❏ POP Before SMTP
Contact your internet service provider to confirm the authentication method of the email server.
The printer may not be able to communicate with an email server even if the authentication method is
available since security may be enhanced (for example SSL communication is necessary). Visit the Epson
support website for the latest information.
http://www.epson.eu/Support
http://support.epson.net/
5. Make the appropriate settings.
The necessary settings vary depending on the authentication method. Enter the information for the email
server you are using.
6. Press OK.
7. Select Connection Check to check that the printer is connected to the email server.
Note:
❏ If an error message is displayed, check if the email server settings are correct.
❏ When you cannot send an email even if the connection check succeeds, check the authentication method for the
email server you are using.

Email Server Setting Items

Items
Authentication Method
Authenticated Account
Authenticated Password
Appendix
(Europe)
(outside Europe)
Explanations
Displays the selected authentication method.
If you select SMTP-AUTH or POP before SMTP as the Au-
thentication Method, enter the user name (email address)
registered to the email server within 30 characters or less.
If you select SMTP-AUTH or POP before SMTP as the Au-
thentication Method, enter the password of the authenti-
cated account within 20 characters or less.
230