Table of Contents
Advertisement
User's Guide
1. Slide out the output tray.
2. Slide the edge guides to adjust to the paper size you want to use.
3. Insert the paper with the printable side facing down until the printer partially pulls in the paper.
Important:
c
❏ Load paper short edge first. However, when you have set the long edge as the width of the user defined size,
load paper long edge first.
❏ Keep the paper straight to prevent it from being fed askew.
Note:
If the printer does not pull in the paper, load it again.
Related Information
"Paper Handling Precautions" on page 42
&
Loading Paper
51
Advertisement
Table of Contents
