Checking An Email Server Connection; Where To Get Help; Technical Support Web Site - Epson WF R8591 User Manual

User's Guide
Items
Sender's Email Address
SMTP Server Address
SMTP Server Port Number
POP3 Server Address
POP3 Server Port Number

Checking an Email Server Connection

1. Enter Setup from the home screen.
2. Select System Administration > Wi-Fi/Network Settings > Advanced Setup.
3. Select Email Server > Connection Check to check that the printer is connected to the email server.
Note:
❏ If an error message is displayed, check if the email server settings are correct.
❏ When you cannot send an email even if the connection check succeeds, check the authentication method for the
email server you are using.

Where to Get Help

Technical Support Web Site

If you need further help, visit the Epson support website shown below. Select your country or region and go to the
support section of your local Epson website. The latest drivers, FAQs, manuals, or other downloadables are also
available from the site.
http://support.epson.net/
http://www.epson.eu/Support
If your Epson product is not operating properly and you cannot solve the problem, contact Epson support services
for assistance.
Appendix
(Europe)
231
Explanations
Specify the email address that the printer uses to send
emails. You can specify the existing email address. To make it
clear that the email is being sent from the printer, you can
acquire an address specifically for the printer and enter it
here.
Enter the server address of the server that sends the email
(SMTP server).
Enter the port number of the server that sends the email
(SMTP server).
If you select POP before SMTP as the Authentication
Method, enter the server address of the server that receives
the email (POP3 server).
If you select POP before SMTP as the Authentication
Method, enter the port number of the email server that re-
ceives the email (POP3 server).