Turning Mute Mode On/Off (Int Mute); Setting The Aux+ Setup Mode; Setting The Aux+ Name Mode; Setting The Aux+ Level (Aux In Gain) - Alpine CDE-9882RSi Owner's Manual

Rsd mp3/wma/aac cd receiver
Hide thumbs Also See for CDE-9882RSi:
Table of Contents

Advertisement

POWER IC ON : The speakers are driven by the built-in
amplifier.
SPEAKER
RIGHT FRONT
SPEAKER
RIGHT REAR
SPEAKER
LEFT REAR
SPEAKER
LEFT FRONT
• No sound is produced by the system when the power output is set to
OFF.

Turning Mute Mode On/Off (INT MUTE)

MUTE ON / MUTE OFF (Initial setting)
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.

Setting the AUX+ SETUP Mode

AUX+ ON / AUX+ OFF (Initial setting)
An external device (such as a portable music player) can be connected
to the iPod Direct connector of this unit. An iPod Direct/RCA Interface
cable (optional) is required.
A portable music device and an iPod cannot be connected to the iPod
Direct connector at the same time.
AUX+ ON : Set to ON when a portable device is connected. If
SOURCE/
sound of the portable device is input to the unit.
AUX+ OFF : Set to OFF when an iPod is connected.

Setting the AUX+ NAME mode

AUXILIARY
*
(Initial setting) / TV / DVD / PORTABLE / GAME
You can change the AUX+ NAME display in the SETUP mode, when
AUX+ SETUP is ON.
* After the setting is completed, AUX is displayed on the unit.

Setting the AUX+ Level (AUX IN GAIN)

LOW (Initial setting) / HIGH
After setting to ON in "Setting the AUX+ SETUP Mode", this setting
can be carried out.
LOW:
Decreases the external input audio level.
HIGH: Increases the external input audio level.
20
-EN
Speakers
Front
right
Rear
right
Rear
left
Front
left
is pressed and AUX+ is selected, the

USB memory (Optional)

/
SOURCE/

Controlling USB memory (Optional)

A USB memory may be connected to this unit. With a USB memory
connected to this unit, the USB memory will be controllable from this
unit.
• The controls on this unit for USB memory operation are operative
only when a USB memory is connected.
Playing MP3/WMA/AAC Files with the
USB memory (Optional)
If you connect a USB memory containing MP3/WMA/AAC, you can
play these files on this unit.
1
Press SOURCE/
to switch to the USB AUDIO
mode.
The mode will change every time the button is pressed.
TUNER
DISC
USB AUDIO
3
BT AUDIO*
TUNER
1
*
Displayed only when the iPod is connected and AUX+ SETUP is set
to OFF, refer to "Setting the AUX+ SETUP Mode" (page 20).
2
*
Displayed only when the AUX+ SETUP is set to ON, refer to "Setting
the AUX+ SETUP Mode" (page 20).
3
*
Only when BLUETOOTH IN is set to ADAPTE, refer to "Setting the
BLUETOOTH Connection" (page 18).
2
To pause playback, press
Pressing
/
again will resume the playback.
• The root folder is displayed as "ROOT" in the Folder Name Search
mode.
• This unit plays back files on a USB memory device with the same
controls and modes as playback of CDs containing MP3/WMA/AAC.
For details, refer to "CD/MP3/WMA/AAC" on pages 11 to 14.
• Before disconnecting USB memory, be sure to change to another
source or set to pause.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
1
2
iPod*
/AUX+*
/
.

Advertisement

Table of Contents
loading

Table of Contents