Store Preset - GEM GPS3600 Owner's Manual

Store Preset

Whenever you edit a Preset, you will, at some
point, decide that you either want to save your
new sound combination, or simply forget it and
return to using the instrument as before. A modi-
fied Preset that has not been stored to memory
shows a small mark at the top left hand corner
before the name in the Preset selection window.
If you want to cancel all your modifications, ei-
ther select the same Preset again, or select an-
other one.
If you decide you want to store your Preset into
the instrument's memory, the next step will be to
press the STORE PRESET button. Any Preset
that you create yourself can be stored in the Glo-
bal Presets or the Style Presets banks.. During
the storing process, you will first be asked to se-
lect a destination for your new Preset and then
given the opportunity to name it.
SAVING TO THE CURRENT PRESET
1. Press STORE PRESET
The «Store Preset» dialog window opens:
2. Press ENTER to save.
To change the name of the Preset, press the
soft button F7 or F8 and change the name
using the keys of the keyboard. You can re-
fer to the method described in the
Alphanumenric Entry paragraph on page 1.10
of the Quick Guide. Press ENTER to con-
firm the name and return to the Store win-
dow.
3. Press ENTER again to save the Preset with
the new name.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
3•24 Reference Guide
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
TO SAVE TO A DIFFERENT PRESET
1. Press STORE PRESET.
2. Select the Preset or Style-Preset option with
the / cursor arrows.
3. Rotate the DIAL to select the Preset or Style
Preset Group to store to.
4. Move down to the Preset option with the
cursor button and select the Preset to save
to with the DIAL.
5. If you want to give your new Preset a name,
press the F7/F8 soft button
6. Press ENTER to confirm or ESCAPE to can-
cel.
Refer also to the example explained in the
Quick Guide, page 1.33.
○ ○