Jukebox; Song-Presets - GEM GPS3600 Owner's Manual

SOUND VIEW (F5)
Recalls the Sound View page, where you can see
and change the sounds of the current Preset.
TIME/TEMPO (F6)
Recalls the Time/Tempo page, where you can
control the record/playback parameters.
ERASE... (F7)
Here you can cancel a Track or a Song.
Track- Cancels the selected track.
Song - Cancels all tracks (all Song) leaving an
empty Song, ready to start another recording..
The Song-Presets are not cancelled.
METRONOME (F8)
Activates/deactivates the metronome.

SONG-PRESETS

Each Song contains up to 8 Presets, which are
loaded and memorized with the corresponding
Song.
Using the Song-Preset is an alternative and rapid
method of changing Sounds and Effects. Song-
Presets instantly reset the instrument, therefore,
they are very useful during a real time Song re-
cording.
PROGRAMMING SONG PRESETS
Program your Song Preset using the methods
described for the Global Presets and Style Pre-
sets. Store the Song Preset to the Song Preset
bank with STORE PRESET. Refer to the Preset
chapter in the Reference Guide.
A Song Preset can have a maximum of 32 tracks.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
6•4 Reference Guide
○ ○ ○ ○ ○ ○ ○ ○ ○ ○

JUKEBOX

The Jukebox function chains the songs of your
choice and plays them back as a 'medley' with a
single command.
Select the JUKEBOX button (F1) in the Time/
Tempo page. The display shows two columns:
on the left appears a list of Songs in memory while
on the right is the Jukebox list.
The negative highlight cursor shows which song
is selected in the Song list. The frame on the
right shows the destination in the Jukebox list.
Select a Song from the left part to include in the
Jukebox list and press the INSERT button, (F5)
or ENTER, to insert the Song in the list.
Repeat the selection procedure for other Songs
and press INSERT (or ENTER) each time to com-
pile the list.
If you want to substitute one of the names in the
Jukebox list, move to the right part of the display,
select the name to change, move back to the left,
select another Song and press INSERT (or EN-
TER). Now return to the right and select a new
location for the next Song.
○ ○